A washing machine is one of those home appliances you don’t realize you rely on until it stops working.
Whether it’s a minor issue or a major breakdown, knowing how to handle washing machine repair can save you time, stress, and money.
Common Washing Machine Issues and How to Identify Them
Before you jump into repairs or call a technician, it helps to understand what could be going wrong.
Many homeowners face issues with their washing machines, often with no warning.
The machine won’t spin, the water won’t drain, or it just refuses to start. Knowing the most common washing machine issues helps you figure out what needs fixing and how urgent the repair might be.
Here are several washing machine problem that are frequently happen:
1. Washing machine not working at all
This can happen if the power cord is disconnected, the circuit breaker has tripped, or the control board has failed.
Another frequent issue is a faulty door switch, which prevents the machine from starting as a safety measure.
If the washer is completely unresponsive, a technician may need to inspect internal electronics.
2. Not spinning
This issue is commonly caused by a worn or broken belt, which connects the motor to the drum.
Another possibility is a defective lid switch, which acts as a safety mechanism and stops the spin cycle if the lid isn’t securely closed.
It could also be due to motor issues or control board malfunctions.
3. Not draining
Clogged drain hoses or a malfunctioning pump are typical culprits here. If the water doesn’t exit the drum, it can cause delays in the wash cycle or leave clothes soaking wet.
In some cases, debris or small clothing items like socks may be lodged in the pump or drain filter.
4. Water leaking
Leaks can result from loose or damaged hose connections, a cracked or worn-out drum, or a deteriorated door seal.
Over time, rubber components degrade, especially in humid environments. It’s important to address leaks promptly to avoid water damage to your home.
5. Excessive noise or vibration
This can happen if the washing machine is not level, which causes the drum to knock around during cycles.
Unbalanced loads, like washing one large item without counterweights, can also shake the machine violently.
Worn suspension rods or shock absorbers are another common reason for excessive movement and noise.
Understanding the problem helps you communicate better with a repair technician and make informed decisions.
Brand-Specific Repairs: What You Should Know
Different washing machine brands come with unique components and repair requirements.
When searching for washing machine repair, it’s smart to go with technicians experienced with your specific brand.
Samsung Washing Machine Repair
Samsung washers are known for their smart features, but they can also present complex issues. Common problems include:
- Error codes like 4E (water supply issues) or 5E (drainage issues)
- Drum not spinning properly
- Control panel malfunctions
Look for authorized Samsung washing machine repair experts who understand their smart systems and use genuine parts.
LG Washing Machine Repair
LG machines are popular for their direct drive motors and energy efficiency. Still, they can run into:
- Inverter motor problems
- Water leakage
- Cycle timing issues
An experienced LG washing machine repair technician can often fix these with minimal downtime.
Bosch Washing Machine Repair
Bosch is known for its German engineering and durability. That said, these washers can suffer from:
- Drainage problems
- Door locking errors
- Unresponsive control panels
Because Bosch parts can be a bit pricey, it’s essential to work with repair services familiar with the brand to avoid unnecessary costs.
Washing Machine Not Working: What Should You Do First?
If your washing machine suddenly stops working, don’t panic. There are a few things you can check before calling a repair service.
- Check the power: Make sure the machine is plugged in and the socket is functioning.
- Inspect the door: Many machines won’t start if the door isn’t fully shut or if the sensor is faulty.
- Examine the control panel: Are there any flashing lights or error codes?
- Review your last load: Overloading the drum can cause operational failures.
If nothing seems obvious, that’s your cue to contact a professional.
Replace or Repair? Making the Smart Choice
Deciding whether to replace or repair a broken washing machine is a common dilemma for homeowners. It’s not just about cost, factors like age, efficiency, and reliability play a huge role.
Before making a decision, it helps to weigh both short-term expenses and long-term benefits to figure out the most practical option.
Here are what you need to consider.
1. Age of the machine
If it’s over 8 years old, replacement might make more sense. Older machines tend to develop recurring mechanical problems that can become costly over time.
Newer models also offer better features, improved efficiency, and quieter operation, making the switch a worthwhile upgrade.
2. Repair cost
When the cost of repair exceeds 50% of what a new washing machine would cost, opting for a replacement often makes more sense.
Repairs at this level might only offer a short-term fix, especially if the machine is nearing the end of its useful life.
A new washer not only avoids recurring repair expenses but can also bring updated features and better efficiency.
3. Frequency of breakdowns
If problems are constant, the machine is likely nearing the end of its life.
Frequent malfunctions not only interrupt your routine but also increase maintenance expenses. A reliable, new appliance can restore convenience and peace of mind.
4. Energy efficiency
Newer machines save more on water and electricity. They are designed to meet modern efficiency standards and often include eco-friendly wash cycles.
Lower utility bills and reduced environmental impact make energy-efficient models a smart choice for many households.
Contact Home Engineering for Trusted Washing Machine Repair and More
If you’re looking for fast, reliable, and professional washing machine repair in Singapore, Home Engineering is your go-to partner.
Home Engineering also offers a full suite of home renovation services, including:
- Washing Machine Repair
- Home Painting Service
- Cleaning Services (Post-renovation cleaning/Post H.I.P. cleaning)
Get in touch today to schedule your service and bring your home appliances back to life!
